Anything Ridge Runner has out out. It’s super convenient and easy to use. The only limitation I've found is that the blade covering is a cheesy bit of plastic. completes my cold steel viking axe collection. Easy fix--take it out! This tomahawk is an excellent thrower. I used a torch to give it a little aged look and bring out the grain, then I sanded it smooth so as it could slip from my hand easier. The steel does not hold an edge well. Hi, my name is Michael Culligan and I’m the founder and operator of Awesome Axes. I compete in the Society for Creative Anacronism (SCA) and have been in the top ten competitors each year. What can I say. The Cold Steel Norse Hawk is a great, fun tool that you’ll love having in your collection. Cold Steel will get my money over literally anything from Budk. i bought the norse hawk primarily for throwing was initaly disapointed when it bounced off target an head slipped half inch problem easily correced just wish coldsteel had taken care of situation during manufacture edge extremely dull an lock screw far to short since making these corrections i have an excelent throwing hawk. It is well made and the extended cutting edge provides more sticking options. The Cold Steel Norse Hawk is a great, fun tool that you’ll love having in your collection. The chips flew. Subscribe Today: Exclusive Specials, Free Stuff with Every Order, Early Access to New Items! Shop for Products Featured On Instagram Here. Overall I like this one. My ONLY complaint about the handle was that it was a little rough/splintery. The head did not fit the handle, not even close, and the head was not aligned with the handle making the axe glance of things I hit (seriously dangerous). when i received the product i could have knocked the head off with 2 fingers. THis thing is fun to throw! Makes a cool ting sound when chopping feels like your destroying the tree when it rings. The flared blade sticks thru a much greater range of rotation than my other hawks. The feel of this thing in your hand is just nasty. Luckily that takes very little time and you end up with a handle that both feels and looks nice to use. Our medium fancy camp sheath will fit this axe. I'd definitely give them a five out of five after customization. I have owned three of these - all have the same flaw - the head comes loose with use. See more ideas about Cold steel tomahawk, Cold steel, Tomahawks. I set this website up to share my enthusiasm about all things axe (and outdoors) with you – thanks for reading! PRE-BLK FRI. DEALS: BENCHMADE, SPYDERCO, WE, BUCK, ZT, KIZER & MORE! I recommend buying spare handles until you know how far the axe goes in one rotation and get your distance. That’s why I sand or chemically strip off the lacquer and then just treat it with a vegetable oil or some BLO (boiled linseed oil). Broad head for chopping and great for throwing too. Pros: Head Material, Balance, Construction, Weight ... After the mods were finished, about 30-45 minutes, I took it to some well seasoned firewood. The weight of it is perfect, handle is perfect, wich means you can one or two hand your way to glory. That’s fine, though, because the simplicity of the handle means that it’s easy to replace in case you ever do need to change it or even want to change it up to make it longer or shorter. If you’re looking for a lightweight axe with a traditional Viking design that is good value for the money (affordable), the Cold Steel Norse Hawk is probably one of the top five you should consider. After getting one, I order 6 more through Knife Center with the sheaths and gave them to friends. It will even stick if it hits with the handle parrallel with the ground. Instead of tightening the screw loosen it then tap the top of the handle with a mallet or drive it down on the edge of a step to wedge the head tighter into the taper then re-tighten the screw. I actually went to take the head off to sharpen it, and even with the screw out, it held tight. Head Material, Balance, Construction, Handle Material. The shipping was fast, the hawk was securely packed. I recommend not buying this I expected way more of a cs product. The handle of the Norse Hawk is made with American hickory that offers outstanding durability and performance. By using our website you consent to our Cookie Policy. This tomahawk is lightweight which makes you easily operate the tool without getting fatigued. It was wild sharp out of the box, I just gave it a light re-edging because I cant leave well enough alone. It is covered in a thick black paint, the blade needed sharpening, and the handle needed sanding. Cold Steel has a wide range of tools and the Norse Hawk is one of their most popular products. I don't even know where to start. completes my cold steel viking axe collection. Nice thing about the head is it can be used as a hand-tool if removed. The sheath I would give a 3/5 but you kind of need it. To that end, I've bought a couple Cold Steel Viking axes, hand axes, war hammers and spears....all the usual suspects. Unlike many modern tactical tomahawks, which are made out of steel, the Cold Steel Norse Hawk is a classic design and so has a wooden handle. Aug 14, 2019 - Explore Fred Wright's board "Customized Cold Steel Tomahawks" on Pinterest. For our thrown weapons competitions we have a maximum allowable blade edge, and that is 4", meaning that this axe cannot be thrown without being modified. I followed this up with some carnauba wax to seal it from the elements. I sat there and sharpened it on my stone for 30 mins didn't make any difference. It would be a better period piece of the manufacturer offered a choice of sheaths/scabbarding. So, I am going to buy a tomahawk and have narrowed my choices down to 3 Cold Steel hawks. Bought 5 of these for throwing at SCA events (medieval). The head, as received, was not sharp at all. [IMG] K. I just received my two new CS Trail Hawks and I'm ready for ModoMania so I can be jus' like hatchetjack. If you want us to leave it long just let us know and we can do that. All the Cold Steel Hawks are of good quality they just need to be refinished. Pine Fire Outdoors: The H&B Forge Medium Camp…. Everybody is happy with them and I am happy that 6 tomahawks didn't get held up at customs coming to Canada. I'm just learning how to throw, and this axe is a lot of fun. The top of the handle has a bit of a swell to make sure that the axehead stays in place.eval(ez_write_tag([[468,60],'awesomeaxes_com-medrectangle-3','ezslot_5',135,'0','0'])); One of the cons of the handle is that it comes with a lacquer finish. I did not buy mine from KnifeCentre, fyi, but this is the first and last Cold Steel product I will buy period. I have 6 different tomahawks and this is my favorite one. It’s super convenient and easy to use. The Norse Hawk I received has a very nicely finished head, tightly fitted on the haft and the hickory handle seems to have been treated with linseed oil. to help give you the best experience we can. That's not at all a fair comparison. In my opinion this makes the handle slippery, especially when wet. I soak it is stripper to remove the black paint as I prefer the look of good steel. Budk sells mall ninja, useless, "showcase" knives and swords. I bought this cause I love cold steel I have a small collection of cs knifes and wanted to add this to it also to use. The overall length of the tool is 19-inches which enables you to hold it with both hands if you so desire. It’s dimensions of 3 x 10 x 12 inches with a weight of only 1.4 pounds. The axe head is held in with a single screw on the back of the eye, but it hasn't loosened on me once. You can do lots of things with it – from removing the lacquer on the handle and re-treating it, to stripping the paint from the axehead, shining it by using some rough-grit sandpaper, and then polishing it to perfection. The chips flew. For the low price, this axe is well worth it. Construction, Balance, Weight, Head Material, I have thrown this tomahawk over the last five years with great success. You can acid etch the steel as well, or carve runes or something else into the handle. They are much lighter than the trail hawks I previously purchased, but they throw great! Oh, and it also splits wood. So if you you want to use this axe for SCA thrown weapons competitions, check your Kingdom's thrown weapons rules about blade size, you might be better off buying one of the other axes/tomahawks unless you like using a grinder/files to shave off about a 1/2" of steel. Medium Camp Hawk Like the boys hawk, this medium camp also has a 3.5 inch wide blade. Cold Steel products are meant to be used and broken, hence the low prices.